Room Bio
Decontamination Service (RBDS)
is a unique service providing hydrogen peroxide
decontamination for any enclosed space, from vehicles to
entire buildings.
OMC Scientific, a company with over 25 years experience in
the medical and pharmaceutical sector, are the exclusively
licensed provider of RBDS in Ireland.
Proven and published efficacy against a wide range of
micro-organisms
High level of disinfection: 6-log sporicidal reduction
Safe to use on all sensitive electrical equipment
Rapid (Minimal downtime): 300m3 in less than 2 hours
Fully documented and verifiable service using biological
indicators (BI’s)
Bio-decontamination within a room or chamber is achieved by
depositing an even layer of 'micro-condensation' of H2O2
over all surfaces. The term micro-condensation may be
defined as a microscopic film of H2O2, which being at a
sub-micron level, is invisible to the naked eye. Scientific
research has proven that it is this low temperature,
residue-free deposit that actually deactivates
micro-organisms during the gassing process.
The micro-condensation process ensures that the optimum
conditions for biological inactivation are achieved. When
the process reached the dew point the time required for a
log reduction of activity (the D-Value) is shortest. This
occurs when the kill kinetic curve plotted against time is
steepest. The transition between the shallow curve and the
steep section coincides with the onset of
micro-condensation.
BIOQUELL’s RBDS provides an even spread of H2O2 vapour which
can be introduced in the optimum combinations to all areas
of a room or enclosure.
Utilising this system of active distribution, all surfaces
are uniformly exposed to hydrogen peroxide vapour. This
system is operated at ambient room temperature and relative
humidity, without the need to attain significantly reduced
humidity traditionally associated with hydrogen peroxide
bio-decontamination systems. The benefit of being
residue-free means no further wiping down of surfaces is
required on completion of decontamination.
Hydrogen peroxide vapour decomposes to oxygen and water,
hence the bio-decontamination process is residue-free.
Hydrogen peroxide vapour concentration is reduced to below a
1ppm concentration level, which is the current time-weighted
average safe exposure limit, before re-entry to the room is
permitted of hydrogen peroxide, via the vaporiser circuit.
The
information contained in this website is,
to the best or our knowledge, true and accurate
at the time of publication and is solely for
informational purposes. All information on this
site is intended to be accurate, complete and
timely. Western Webs accepts no liability for
any loss or damage howsoever arising as a result
of use or reliance on these web pages, or on
the information thereon, or in respect of information
accessed via any links from the Web pages. Questions
regarding content of this web site should be
sent to sales@western-webs.com.
No information on this site is intended to serve
as legal advice.
